SW42DA

• Features 4 x HDMI inputs which can be switched to the dual HDMI outputs simultaneously
• Supporting Dolby Atmos® Technology
• Supports HDMI 2.0b 18Gbps specification, including 4K 60Hz 4:4:4 UHD video
• Supports distribution of the latest HDR resolutions including HDR10/10+ and Dolby Vision
• HDMI output 1 replicates the HDMI input signal - up to 4K 60Hz 4:4:4 and 5.1.4ch / 7.1.2ch Dolby Atmos® and DTS-HD multi-channel audio
• HDMI output 2 features an optional 4K video down-scaler, and 5.1.4ch / 7.1.2ch to 2ch Dolby Atmos® and DTS-HD audio downmixing 
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos®, Dolby Digital Plus and DTS-HD Master Audio transmission
• HDMI audio breakout of Dolby Atmos® and DTS-HD to up to 8 channels of Dante audio (7.1ch), with an independent 2 down-mixed channels of Dante audio
• HDMI audio breakout of Dolby Atmos® and DTS-HD to up to 10 channels of Dante audio (7.1.2ch / 5.1.4ch)*
• HDMI audio breakout to 7.1ch balanced / unbalanced analogue audio outputs
• HDMI Dolby Atmos® and DTS-HD 7.1 down-mixing to 2ch balanced and unbalanced audio ouputs
• Supports ARC/eARC including breakout to 7.1ch and 2ch downmixed analogue, and Dante audio
• Supports: 44.1, 48, 88.2 & 96kHz Dante® sample rates @ 24-bit
• Configurable Dante® device latency using Dante® Controller
• Supports AES67 RTP audio transport
• Control via TCP/IP, web-GUI, RS-232, front panel buttons, and infrared 
• HDCP 2.3 compliant with advanced EDID management

* The Dante 2ch down-mix channels can be re-allocated to allow for additional height channels (7.1.2ch / 5.1.4ch)

® Dolby Atmos is a registered trademark of Dolby Laboratories Licensing Corporation.

• Video Input Connectors: 4 x HDMI Type A, 19-pin, female
• Video Output Connectors: 2 x HDMI Type A, 19-pin, female
• Audio Output Connectors: 1 x Optical (Toslink), 5 x 5-pin Phoenix connector (8ch and separate 2ch balanced / unbalanced analogue audio), 1 x RJ45, female (100Mbps Dante® network)
• EDID: 4-pin DIP switch
• TCP/IP Control: 1 x RJ45, female
• RS-232 Port: 1 x 3-pin Phoenix connector
• IR Input Ports: 1 x 3.5mm stereo jack

• Dimensions (W x H x D): 220mm x 214mm x 45mm, without feet or connections
• Shipping Weight: 2.6kg (TBC)
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
• Power Supply: Internal 100-240V AC

1 x SW42DA
1 x Remote Control
1 x IR Receiver
1 x 19” Rack Mounting Kit
4 x Feet
1 x Quick Reference Card
IEC Power Cable(s)

Download firmware